• Joiner Fitting

  • SAE100R12

    SAE100R12 CONSTRUCTION: This hose shall consist of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover APPLICATION: This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C ~ +120°C (-104°F ~ 248°F)

  • Single Tail Fitting

  • Three Way Brass Fitting

  • Union Elbow Fitting

  • Vibration Eliminator / Pump Connector

    Pump Connectors are flexible metal assemblies, primarily designed to isolate vibration from pumps on both the suction and discharge sides of the pump. They help to prevent damage caused by vibration, expansion and contraction. They accept thermal expansion and reduce piping stress due to minor misalignment. Constructed of stainless steel Omega corrugated metal and surrounded with a woven braid of high tensile stainless steel, these assemblies are flexible and are suitable to withstand high pressure and temperatures.

  • Vibration Eliminator / Pump Connector

    Pump Connectors are flexible metal assemblies, primarily designed to isolate vibration from pumps on both the suction and discharge sides of the pump. They help to prevent damage caused by vibration, expansion and contraction. They accept thermal expansion and reduce piping stress due to minor misalignment. Constructed of stainless steel Omega corrugated metal and surrounded with a woven braid of high tensile stainless steel, these assemblies are flexible and are suitable to withstand high pressure and temperatures.

  • PG-04 BSP Back

  • PG-04 BSP Bottom

  • PG-04 NPT Back

  • PG-04 NPT Bottom

  • PG-08 BPT Bottom (Oil)

  • PG-08 NPT Lower Back (Oil)

  • Pressure Test Kit (analog)

    SMB-20-3-xxx/xxx-W3 or SMB-15-3-xxx/xxx-W3 SMB-20/100-1-xxx-W3 or SMB-15/100-1-xxx-W3 In addition to the individual SPG gauges, the STAUFF Pressure Gauges are also available as a part of a Pressure Test Kit SMB. The SMB Pressure Test Kits are assembled in various versions, in accordance with customer wishes. All Pressure Test Kits are supplied in a handy case with custom-designed foam inserts. Further information on these products and components please see Catalogue 8 - STAUFF Diagtronics. Note: All test kits are available as SMB-15 version.

  • Pressure Test Kit (digital)

    SMB-DIGI In addition to the individual SPG-DIGI devices, the STAUFF Digital Pressure Gauges are also available as a part of a Pressure Test Kit SMB-DIGI. The SMB-DIGI Pressure Test Kits are assembled in various versions, in accordance with customer wishes. All Pressure Test Kits are supplied in a handy case with custom-designed foam inserts. Further information on these products and components please see Catalogue 8 - STAUFF Diagtronics.

  • SAE100R13

    SAE100R13 CONSTRUCTION: This hose shall consist of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover APPLICATION: This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C ~ +120°C (-104°F ~ 248°F)

  • Test Hoses

    SMS / SGS DN 2 + DN 4 Working Pressure up to 630 bar / 9135 PSI

  • EN856-4SP

    EN856-4SP CONSTRUCTION: This hose shall consist of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover APPLICATION: This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C ~ +100°C (-104°F ~ 212°F)

  • PU Duct Hose Spring Wire

    PU Duct Hose is a very light weight, highly flexible and compressible hose used for abrasive dust, powder / fibers. Wall Pure Polyester Polyurethane with abrasion resistance and flame retardant addictives Spiral Spring steel wire (copper plated) Characteristics Halogen & Plasticizer free | Gas tight | High tensile strength | Smooth inner lining | According to TRBS 2153 (Zone 1, 21) for non flammable dust / bulk solids & gas / liquid with low conductivity of electrostatic charges when earthed at both ends of spiral | Hardly flammable according to DIN 4102 B1 Temperature –40°C to +90°C (peak up to 125°C) Wall Thickness approx 0.4mm

  • PVC Braided Hose

  • PVC Clear Hose